R-B Pump, Inc. was established in 1980 in Baxley, Georgia. Our specialty is custom-made pumps. Since inception, over five thousand pumps have been designed and manufactured. Our scope of supply includes but is not limited to the following:
I. Flood Protection pumps
We serve municipalities, major airports, and U.S. Army Corps. on various flood protection projects. Pump flows vary from 1000 GPM to 600,000 GPM, with design heads ranging from 10 ft. to 54 ft. Available horsepowers are as high as 5000, and pump sizes range up to 9 ft. in diameter (discharge). Different materials are available for the manufacture of these pumps.
II. FM Approved fire pumps
R-B Pump has one of the largest selections of fire pumps in the industry. Our fire pumps are manufactured to NFPA-20 standards, and are FM approved.
Split case pumps are approved from 200 GPM to 8000 GPM, with pressures up to 570 psi and horsepowers up to 2000. These units are available in different sizes, all based on NFPA requirements. Our pumps require lower horsepower due to higher efficiencies.Vertical turbine multistage fire pumps are approved from 50 GPM to 6000 GPM, with heads as high as 535 psi and horsepowers up to 1690. Inline fire pumps are approved from 25 GPM to 750 GPM in a variety of pressure ranges and pump models to suit the particular application.End suction fire pumps are approved from 25 GPM to 750 GPM in different pump sizes.In addition to these pumps, we have multi-stage booster pumps for very high heads, and have also designed and manufactured scores of other specialty pumps.
III. Military Pumps
R-B Pump manufactures specialty pumps used by the U.S. Navy specifically designed to meet MIL standards. These pumps are mostly composed of Monel and copper-nickel metallurgy. Flows vary from 30 GPM to 3000 GPM. For the dry-docks around Navy shipyards, we also supply custom-made pumps with heads up to 100 ft. and flows up to 100,000 GPM. These pumps are non-clog, dry-pit types requiring horsepowers up to 1500, and pump sizes up to 48″ in diameter (discharge).For the Air Force, Coast Guard, and Army, R-B Pump manufactures self-priming pumps to meet MIL standards. These self-priming pumps are used for pumping fuel and water. Flows are as high as 2000 GPM, heads are as high as 500 ft., and discharge sizes up to 6″ are available.
IV. QUALITY CONTROL PROGRAM
All of our products are made with strict quality control, and the factory has the government required MIL-I-45208 program in place.
V. OUR FACILITIES
Our factory has all CNC machines, and uses all American-made products in our pumping systems. We have professional engineers and CAD system operators to create our designs and update them as needed.
R-B FIRE PUMPS
R-B Pump, Inc., the nation’s full-range fire pump manufacturer, announces the first entire fire pump line designed from inception to serve the fire protection market. Freed from existing designs intended for other markets, R-B fire pumps have been designed specifically as fire pumps. R-B Pump, Inc., provides dependable, modern, highly efficient, and practical designs needed for the industry today, all from its own foundry in the U.S.A.There are four types of FM fire pumps that R-B Pump offers: the ANSI End Suction, Inline, Vertical Turbine, and Split-Case design. These pumps are intended for fire service, even though they can be used in other applications as well. Each design offers unique advantages for their respective applications. The End-Suction and Inline pumps, by current definition, are applied for rated capacities up to 750 GPM. The Horizontal Split-Case type units and Vertical Turbine pumps are applied for rated flows of 250 GPM to 8000 GPM as per NFPA-20.
Fire Protection Systems
In the prevention of loss of life or damage to property, modern fire protection systems utilize a pump to provide the flow and water pressure needed when adequate supply is not available. A pump for this service requires special construction, components, and accessories to insure safe, reliable operation. These special fire pump units are furnished to meet the standards of the National Fire Protection Association Pamphlet No. 20 (NFPA 20), Factory Mutual (FM). All R-B Fire Pumps meet or exceed these requirements.
Approved fire pumps are available in 24 standard flow ranges. The differential head of any fire pump will have a minimum rating of 40 psi. Every fire pump is given a complete factory performance test to verify compliance to the rated conditions before shipment from the factory.
R-B fire pumps have been designed using the latest hydraulic techniques available, producing fire pumps with exceptionally high efficiencies. The higher pump efficiencies allow for lower motor and diesel engine ratings, which translates to lower project costs and space requirements. Each R-B fire pump has a 400 psi casing working pressure as standard design. The rugged design and construction of the pump is evident from the working pressure to the smallest part, to assure the reliability needed for any given system.
Each Horizontal Split-Case and Inline unit have a common center line between the suction and discharge flanges. The flange sizes have also been designed to best match the minimum pipe sizes given by NFPA 20. In most cases, this feature eliminates the eccentric and concentric fittings, thus saving space, cost, and installation time. Modern patterns allow for better uniformity between castings, and contribute to the higher pump efficiencies.
Quality is of the utmost concern at R-B Pump, Inc. Our pumps are designed, manufactured, assembled and tested all at our modern production facility. Quality checks extend to non-manufactured items supplied to assure total system compatibility. Since all the pump castings are produced in our foundry in the U.S.A. we control the quality of each casting metallurgy. Since all our castings are manufactured in our foundry, WE PROVIDE 5 YEAR WARRANTY ON OUR PUMPS.
Excellent design, quality construction, and knowledgeable personnel provide the reliability required for an R-B Fire Pump System.
You must be logged in to post a comment.